Lighting Installations and Retrofits

Lighting Installations and Retrofits


LED Office Lighting Options

Most office 2×4′ recessed troffers still use old T8 or T12 lamps and ballasts. Convert to LED and save up to 75% in energy costs.

We offer two options for office lighting, depending on whether you want to just save on energy costs or you’re looking for a new, upgraded look for your offices.

image/svg+xml Openclipart eco light bulb green icon 2013-09-14T21:31:01 http://openclipart.org/detail/183457/eco-light-bulb-green--icon-by-dominiquechappard-183457 dominiquechappard ecology energy green icon light

Office Lighting Upgrade Options:

For typical office 2×4’ prismatic or parabolic recessed ceiling troffers, we can convert them from T12 or T8 fluorescent lamps to long life, ballast bypass/direct wired LED tubes. This provides as much as a 70% reduction in lighting energy costs.

Your 2nd option would be to have us replace your outdated 2×4′ ceiling troffers with a new, updated look using energy efficient LED flat panel fixtures as shown above. This provides a very modern look while saving 75% in energy. Think about it, 2×4’ prismatic lensed office fixtures have been the standard office fixtures since 1968. After 55 years, it’s time to consider upgrading to today’s more modern look!

Either option reduces your energy costs from 144 or 112 watts down to just 30-42 watts.

image/svg+xml Openclipart eco green energy icon 2012-05-26T16:42:27 https://openclipart.org/detail/170223/eco-systemdic-energy-by-cybergedeon dominiquechappard ecology energy green icon plug

Let Us Help You Brighten Your Facility’s Lighting…..While Reducing Your Lighting Energy Costs

WebElectric Products specializes in helping facility owners and managers reduce their lighting energy costs and brighten their facilities by performing a turn-key, lighting retrofit to energy efficient LED high bay fixtures in your high bay production or warehouse areas. We can upgrade your office and exterior fixtures as well.  We do all this without interrupting your operation and with a minimal amount of your valuable time.

Your Turnkey Lighting Retrofit – No Risk Analysis

We typically only need 20 minutes of time with the business owner or upper management and then we’re out of sight working with your plant manager and maintenance team to collect lighting information required to finish our analysis.

We Do It All

Our turnkey process means we DO IT ALL FOR YOU and EVERYTHING is included. We can deliver your new fixtures from our local warehouse. Our installation team brings the required lifts for your installation. We are happy to work “off shifts” in order to make sure we don’t interrupt your operation. We dispose of your old fixtures and lamps. Our proposal includes everything including sales tax with no surprise fees, no interruption to your production schedule and with a minimal amount of top management’s time.

Energy Savings Ideas

  • Install energy-efficient LED high bay fixtures in your production & warehouse areas
  • Convert Office T-12 and T-8 lamps to direct wired, LED tubes
  • Convert Office 2×4′ ceiling troffers to LED flat panels for an updated look
  • Convert to LED exit signs
  • Add occupancy sensors or lighting controls
  • Install LED exterior lighting with controls


Let us retrofit your existing high bay light fixtures and replace them with energy efficient LED fixtures. You’ll save 50% to 70% in energy costs and realize a fast payback on your retrofit project. In addition, you’ll realize dramatically brighter lighting.

Similar energy savings opportunities are available if we convert your outdated T8 or T12, office troffer light fixtures or 8 foot, industrial fluorescent fixtures found in many production and warehouse facilities.

What factors can impact the payback rate?

  • Number of shifts worked / hours the lights are on
  • Complete installation or spread out over time
  • Fluctuation up or down of operation hours
  • Increased cost of KWh rate will shorten payback period

Find out how much you can save & how you’ll benefit ... with absolutely “no obligation”

  • Tired of high energy bills?
  • Ready for a better-illuminated facility?
  • Not sure of the correct lighting solution for your facility?
  • You want to upgrade your lighting but concerned about interrupting production?
  • Need a lighting upgrade, but don’t have the time to deal with it?
  • Looking for a turn-key provider who can make this happen without wasting your valuable time?

WebElectric Products makes it easy, We’re here to help!



OFFICES: We provide turnkey lighting upgrades for offices.

Benefits of a WebElectric Lighting Retrofit Project:

  • 50-70% Lighting Energy Savings
  • Dramatically Brighter Lighting
  • Complete Turnkey Installation
  • No Disruption To Your Operation
  • After Hours Installation available
  • Minimal Time Required by Upper Management
  • Fast Payback
  • Fixtures available typically within one week
  • Most Installations Start Within 10 Days ARO
  • No Hassles

Steps in the Lighting Retrofit Process

For your turnkey lighting retrofit project, we will: 

Respond promptly to your inquiry for a no-risk lighting analysis.

Meet and survey your facility with your plant manager or maintenance team.


Provide your optimum lighting solutions.

Present results of your payback and return on investment.


Budget money isn’t required if you finance your project over time.

Deliver your fixtures from our local inventory.


Provide required lifts


Install your new lighting without disrupting your operation

Dispose of your old fixtures and recycle old lamps in accordance with EPA regulations.

Complete any qualified utility rebate applications on your behalf

In many cases your project pays for itself using the positive cash flow from your reduced utility bill.

Don’t just take our word for it, see the testimonials from our many satisfied clients!

Lighting Terminology

Color temperature is conventionally stated as Kelvin temperature, having the unit symbol K. Color temperatures over 5,000K are called cool colors (bluish white), while lower color temperatures (2,700–3,000K) are called warm colors (yellowish white through red).

Offices would typically use 4100K while a warehouse or manufacturing plant is better served with brighter, 5000K (whiter white).

The unit of measurement indicating how much light is reaching the surface, 30 inches above the floor.

Color rendering index is the color appearance of an object when illuminated. Scales ranges from 0 to 100. The higher the CRI number, the less distortion of the object’s color, providing a more accurate rendering of the objects actual color.

Lighting Installations and Retrofits

Share by: