Brake Light Pulser
  Brake Light Pulser    Brake Light Pulser    Brake Light Pulser
  Brake Light Pulser
 "Plug-N-Play" Installation

 No Adjustments Required

 Works On 2006+ Solstice

 Works On 2007+ Saturn Sky

 "Delay-Repeat" Circuitry

   


These two-seater sports cars are low and not always seen by the driver behind you.  The BLP-1PS pulser module can give you an extra measure of safety!  These devices are full "Plug-N-Play" harnesses that simply plug into your existing Center High Mount Brake Light.  There are no wires to cut, and no adjustments to make.

The module automatically pulses your third brake light when you apply your brakes.  The light will pulsate on and off for about a second, then stay on steady for as long as you press the brake pedal.  The unit is designed to create a gentle fluttering of light, so your car is more noticeable, yet it doesn't aggravate the driver behind you (notice how you can see it flashing, even while reading text down here!).

The "Delay-Repeat" circuit means the brake lights have to be off for at least 15 seconds before the cycle can be restarted.  So, if you are in bumper-to-bumper traffic, the brake light isn't always pulsing.


    For 2006+ Solstice and 2007 Saturn Sky:

    Qty  
  BLP-1PS Brake Light Pulser,  $59 ..........  

 

            Copyright WebElectric Products, LLC. All rights reserved.