Brake Light Pulser
  Brake Light Pulser
 "Plug-N-Play" Installation

 No Adjustments Required

 Works On 1997-2013 Corvettes

 "Delay-Repeat" Circuitry

   


Your Corvette is low and not always seen by the driver behind you.  The BLP-1C5 and BLP-1C6 pulser modules can give you an extra measure of safety!  These devices are full "Plug-N-Play" harnesses that simply plug into your existing Center High Mount Brake Light.  There are no wires to cut, and no adjustments to make.

The module automatically pulses your third brake light when you apply your brakes.  The light will pulsate on and off for about a second, then stay on steady for as long as you press the brake pedal.  The unit is designed to create a gentle fluttering of light, so your car is more noticeable, yet it doesn't aggravate the driver behind you (notice how you can see it flashing, even while reading text down here!).

The "Delay-Repeat" circuit means the brake lights have to be off for at least 15 seconds before the cycle can be restarted.  So, if you are in bumper-to-bumper traffic, the brake light isn't always pulsing.


    For 2005-2013 Corvettes:

    Qty  
  BLP-1C6 Brake Light Pulser,  $59 ..........  
  
    For 1997-2004 Corvettes:
    Qty  
  BLP-1C5 Brake Light Pulser,  $59 ..........  

 

            Copyright WebElectric Products, LLC. All rights reserved.